CLI Guide

domain-password
Set the authentication password for a routing domain.
Syntax
domain-password [hmac-md5 | encryption-type] password
To disable the password, use the no domain-password command.
Parameters
hmac-md5 (OPTIONAL) Enter the keywords hmac-md5 to encrypt the
password using MD5.
encryption-type (OPTIONAL) Enter 7 to encrypt the password using DES.
password Enter an alphanumeric string up to 16 characters long. If you
do not specify an encryption type or hmac-md5
keywords, the password is processed as plain text which
provides limited security.
Defaults No default password.
Command Modes ROUTER ISIS
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The domain password is inserted in Level 2 link state PDUs (LSPs), complete
sequence number PDUs (CSNPs), and partial sequence number PDUs (PSNPs).
Related
Commands
• area-password — configures an IS-IS area authentication password.
• isis priority — configures the authentication password for an interface.
graceful-restart ietf
Enable graceful restart on an IS-IS router.
Syntax
graceful-restart ietf
To return to the default, use the no graceful-restart ietf command.
Parameters
ietf Enter ietf to enable graceful restart on the IS-IS router.
Defaults Graceful restart disabled.
Command Modes ROUTER ISIS
Intermediate System to Intermediate System (IS-IS)
897