CLI Guide

To disable redistribution, use the no redistribution {connected | static}
command.
Parameters
connected Enter the keyword connected to redistribute routes from
physically connected interfaces.
static Enter the keyword static to redistribute manually
configured routes. These routes are treated as incomplete
routes.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name
of an established route map.
If the route map is not configured, the default is deny (to
drop all routes).
Defaults Not configured.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
If you do not configure the default-metric command, in addition to the
redistribute command, or there is no route map to set the metric, the metric
for redistributed static and connected is “0”.
To redistribute the default route (0::0/0), configure the neighbor default-
originate
command.
Related
Commands
neighbor default-originate — injects the default route.
show ip bgp ipv6 unicast
View the current BGP information.
Syntax
show ip bgp ipv6 unicast [network [network-mask] [longer-
prefixes]]
Parameters
network (OPTIONAL) Enter the network address (in dotted decimal
format) of the BGP network to view information only on that
network.
network-mask (OPTIONAL) Enter the keywords network mask (in slash
prefix format) of the BGP network address.
862
IPv6 Border Gateway Protocol (IPv6 BGP)