CLI Guide

Parameters

all Enter the keyword all to change both the bootflash and

bootselecter images.

bootflash-image Enter the keywords bootflash-image to change the

bootflash image.

bootselector-

image

Enter the keywords bootselector-image to change the

bootselector image.

0–5 Enter the keyword 0–5 to upgrade only the mentioned

stack-unit.

all Enter the keyword all to upgrade all the member stack-

units.

booted Enter the keyword booted to upgradefrom the current

image in the M I/O Aggregator.

ftp: After entering the keyword ftp:, you can either follow it

with the location of the source file in this form: //

userid:password@hostip/filepath

or press Enter to

launch a prompt sequence.

tftp: After entering the keyword tftp:, you can either follow it

with the location of the source file in this form: //

hostlocation/filepath

or press Enter to launch a

prompt sequence.

flash: After entering the keyword flash:, you can either follow it

with the location of the source file in this form: //

filepath

or press Enter to launch a prompt sequence.

usbflash: After entering the keyword usbflash:, you can either

follow it with the location of the source file in this form: //

filepath

or press Enter to launch a prompt sequence.

A: Enter this keyword to upgrade the bootflash partition A.

B: Enter this keyword to upgrade the bootflash partition B.

Defaults none

Command Modes EXEC Privilege

Supported Modes All Modes

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

8.3.17.0 Supported on the M I/O Aggregator.

Usage Information

You must reload the Dell Networking OS after executing this command.

File Management