CLI Guide

NOTE: The :: notation specifies successive hexadecimal

fields of zeros.

peer-group-name Enter the name of the peer group.

ttl (OPTIONAL) Enter the number of hops as the time to live

(ttl) value. The range is from 1 to 255. The default is 255.

Defaults Disabled.

Command Modes ROUTER BGP

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information To prevent loops, the neighbor ebgp-multihop command does not install

default routes of the multihop peer. Networks not directly connected are not

considered valid for best path selection.

neighbor fall-over

Enable or disable fast fall-over for BGP neighbors.

Syntax

neighbor {ipv6-address | peer-group-name} fall-over

To disable, use the no neighbor {ipv6-address | peer-group-name}

fall-over command.

Parameters

ipv6-address Enter the IPv6 address in the x:x:x:x::x format.