CLI Guide

ManualsBrandsDell ManualsAccess PlatformsFN IO Module

801

802

803

804

805

806

807

808

809

810

Defaults Disabled.

Command Modes ROUTER BGPV6-ADDRESS FAMILY

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information By default, when you create a neighbor/peer group configuration in the Router

BGP context, it is enabled for the IPv6/Unicast AFI/SAFI. By using activate in the

new context, the neighbor/peer group is enabled for AFI/SAFI.

neighbor advertisement-interval

Set the advertisement interval between BGP neighbors or within a BGP peer group.

Syntax

neighbor {ipv6-address | peer-group-name} advertisement-

interval seconds

To return to the default value, use the no neighbor {ipv6-address | peer-

group-name} advertisement-interval command.

Parameters

ipv6-address Enter the IPv6 address in the x:x:x:x::x format.

NOTE: The :: notation specifies successive hexadecimal

fields of zeros.

peer-group-name Enter the name of the peer group to set the advertisement

interval for all routers in the peer group.

seconds Enter a number as the time interval, in seconds, between

BGP advertisements. The range is from 0 to 600 seconds.

The default is 5 seconds for internal BGP peers and 30

seconds for external BGP peers.

Defaults

• seconds = 5 seconds (internal peers)

• seconds = 30 seconds (external peers)