CLI Guide

configured (OPTIONAL) Enter the keyword configured to display line

card interfaces with non-default configurations only.

status (OPTIONAL) Enter the keyword status to display the

checksum for the running configuration and the start-up

configuration.

Command Modes EXEC Privilege

Supported Modes All Modes

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O aggregator.

8.3.17.0 Supported on the M I/O Aggregator.

Example

Dell#show running-config

Current Configuration ...

! Version 9-4(0-180)

boot system stack-unit 0 primary tftp://10.11.8.12/dv-ci-stomp-

tc-1-a1

redundancy auto-synchronize full

hostname Dell

...

Example

Dell#show running-config status

running-config bytes 5063, checksum 0xF6F801AC

startup-config bytes 4835, checksum 0x764D3787

Dell#

Example

Dell#sh running-config interface vlan

interface Vlan 1

ip address dhcp

mtu 2500

no shutdown

Dell#

Usage Information The status option allows you to display the size and checksum of the running

configuration and the startup configuration.

show startup-config

Display the startup configuration.

Syntax

show startup-config

File Management