CLI Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
capture bgp-pdu neighbor (ipv6) — enables route reflection between the route
reflector and the clients.
show capture bgp-pdu neighbor — configures a route reflector and clients.
clear ip bgp * (asterisk)
Reset all BGP sessions in the specified category. The soft parameter (BGP Soft Reconfiguration) clears the
policies without resetting the TCP connection.
Syntax
clear ip bgp * [ipv4 multicast soft [in | out] | ipv6 unicast
soft [in | out] | soft [in | out]]
Parameters
* Enter an asterisk ( * ) to reset all BGP sessions.
ipv4 multicast soft
[in | out]
(OPTIONAL) Enter the keywords ipv4 multicast soft
[in | out] to set options within the specified IPv4
address family.
ipv6 unicast soft
[in | out]
(OPTIONAL) Enter the keywords ipv6 multicast soft
[in | out] to set options within the specified IPv6
address family.
soft (OPTIONAL) Enter the keyword soft to configure and
activate policies without resetting the BGP TCP session, that
is, BGP Soft Reconfiguration.
NOTE: If you enter clear ip bgp ip6-address
soft
, both inbound and outbound policies are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound
policies.
out (OPTIONAL) Enter the keyword out to activate only
outbound policies.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
794
IPv6 Border Gateway Protocol (IPv6 BGP)