CLI Guide

configured (OPTIONAL) View information on all IPv6 configured
interfaces.
gigabitethernet (OPTIONAL) View information for an IPv6 gigabitethernet
interface.
linecard slot/ port (OPTIONAL) View information for a specific IPv6 linecard or
stack-unit. The range is 0 to 11.
managementethe
rnet slot/ port
(OPTIONAL) View information on an IPv6 Management port.
Enter the slot number (0-1) and port number zero (0).
loopback (OPTIONAL) View information for IPv6 Loopback interfaces.
port-channel (OPTIONAL) View information for IPv6 port channels.
tengigabitethernet (OPTIONAL) View information for an IPv6 tengigabitethernet
interface.
fortyGigE (OPTIONAL) View information for an IPv6
fortygigabitethernet interface.
vlan (OPTIONAL) View information for IPv6 VLANs.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The Management port is enabled by default (no shutdown). If necessary, use the
ipv6 address command to assign an IPv6 address to the Management port.
Example
Dell#show ipv6 int te 0/2
TenGigabitEthernet 0/2 is up, line protocol is up
IPV6 is enabled
Link Local address: fe80::201:e8ff:fea7:497e
Global Unicast address(es):
100::2, subnet is 100::/64 (MANUAL)
Remaining lifetime: infinite
Global Anycast address(es):
Joined Group address(es):
ff02::1
ff02::2
ff02::1:ff00:2
ff02::1:ffa7:497e
ND MTU is 0
ICMP redirects are not sent
DAD is enabled, number of DAD attempts: 3
ND reachable time is 39610 milliseconds
ND base reachable time is 30000 milliseconds
IPv6 Basics
771