CLI Guide

output} interface option with the mac-address-

table static command.

Defaults Not configured.

Command Modes CONFIGURATION

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.3(0.0) Added the support for association of an IP address with

multicast MAC address on the MXL platform.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information For multicast mode of NLB, to associate an IP address with a multicast MAC

address in the switch, use address resolution protocol (ARP) by entering the arp

ip-address multicast-mac-address command in Global configuration

mode. This setting causes the multicast MAC address to be mapped to the cluster

IP address for NLB mode of operation of the switch.

You cannot use Class D or Class E IP addresses or zero IP address (0.0.0.0) when

creating a static ARP. Zero MAC addresses (00:00:00:00:00:00) are also invalid.

Commands

clear arp-cache — clears dynamic ARP entries from the ARP table.

show arp — displays the ARP table.

arp learn-enable

Enable ARP learning using gratuitous ARP.

Syntax