CLI Guide

Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell(conf-if-vl-1)#show config
!
interface Vlan 1
description a
no ip address
mtu 2500
shutdown
Dell(conf-if-vl-1)#
show config (from PROTOCOL LLDP mode)
Displays the LLDP configuration.
Syntax
show config
Command Modes PROTOCOL LLDP
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell(conf-lldp)#show conf
!
protocol lldp
Dell(conf-lldp)#
show vlan
Displays the current VLAN configurations on the switch.
Syntax
show vlan [brief |id vlan-id | name vlan-name]
Parameters
brief (OPTIONAL) Enter the keyword brief to display the
following information:
• VLAN ID
• VLAN name (left blank if none is configured.)
• Spanning Tree Group ID
• MAC address aging time
• IP address
Interfaces
685