CLI Guide

Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
clear mac-address-table dynamic
Clear the MAC address table of all MAC addresses learned dynamically.
Syntax
clear mac-address-table dynamic {interface tengigabitethernet
slot/port-id}
Parameters
interface Enter the keyword interface range and one of the
interfaces — slot/port, port-channel or VLAN number. Select
the range of interfaces for bulk configuration. You can enter
up to six comma separated ranges-spaces are not required
between the commas. Comma-separated ranges can
include VLANs, port-channels and physical interfaces.
Slot/Port information must contain a space before and after
the dash. For example, interface range tengigabitethernet
0/1 - 5 is valid; interface range tengigabitethernet 0/1-5 is
not valid.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
default vlan-id
Set the default VLAN ID.
Syntax
default vlan-id <vlan-id>
To reset the default VLAN ID, use the no default vlan-id command.
Defaults none
Command Modes CONFIGURATION
Supported Modes All Modes
680
Interfaces