CLI Guide

NOTE: This command also enables you to view
information corresponding to a range of ports.
• For physical interfaces, you can specify multiple
ports as slot/port-range. For example, if you
want to display information corresponding to all
ports between 1 and 4, specify the port range as
show interfaces interface-type 1/1 - 4.
• For port–channel interfaces, you can specify
multiple ports as port-range. For example, if you
want to display information corresponding to all
ports between 1 and 4, specify the port range as
show interfaces port—channel 1 - 4.
stack-unit unit-id (OPTIONAL) Enter the keywords stack-unit followed by
the stack member number. The range is from 0 to 5.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM and added support to display the
interface configurations corresponding to a range of ports.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The following describes the show interfaces switchport command for the
following example.
Items Description
Name Displays the interface’s type, slot, and port number.
802.1QTagged Displays whether if the VLAN tagged (“True”), untagged
(“False”), or hybrid (“Hybrid”), which supports both untagged
and tagged VLANs by port 13/0.
Vlan membership Lists the VLANs to which the interface is a member. Starting
with Dell Networking OS version 7.6.1, this field can display
native VLAN membership by port 13/0.
Example
Dell#sh interfaces switchport
Codes: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Trunk, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT
untagged, V - VLT tagged
Name: TenGigabitEthernet 2/9
Interfaces
655