CLI Guide

NOTE: This command also enables you to view
information corresponding to a range of ports.
However, for Open Networking (ON) platforms the
notation for specifying port range in the command is
different from how you specify in non-ON platforms.
• For non-ON platforms, you can specify multiple
ports as slot/port-range. For example, if you
want to display information corresponding to all
ports between 1 and 4, specify the port range as
show interfaces interface-type 1/1 - 4.
• For ON platforms, you can specify multiple ports as
slot/port/[subport] - slot/port/
[subpot]
. For example, if you want to display
information corresponding to all ports between 1
and 4, specify the port range as show interfaces
interface-type 1/1/1 - 1/4/1.
summary (OPTIONAL) Enter the keyword summary to display the
current summary of dampening data, including the number
of interfaces configured and the number of interfaces
suppressed, if any.
detail (OPTIONAL) Enter the keyword detail to display detailed
interface dampening data.
Defaults none
Command Modes EXEC
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM and added support to display the
interface configurations corresponding to a range of ports.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show interfaces dampening
Interface Supp Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Te 3/2 Up 0 0 20 800 4500 120
Te 3/8 Up 0 0 5 750 2500 20
Dell#
Related
Commands
dampening — configures dampening on an interface.
show interfaces — displays information on a specific physical interface or virtual
interface.
show interfaces configured — displays any interface with a non-default
configuration.
650
Interfaces