CLI Guide

MONITOR SESSION Mode

In CONFIGURATION mode, use the monitor session command to enter MONITOR SESSION mode

and configure port monitoring.

To enter MONITOR SESSION mode:

1. Verify that you are logged in to CONFIGURATION mode.

2. Use the monitor session command. Include the monitor session ID. The prompt changes to

include (conf-mon-sess).

You can return to CONFIGURATION mode by using the exit command.

PROTOCOL LLDP Mode

In CONFIGURATION mode, use the protocol lldp command to enter PROTOCOL LLDP mode and

configure the LLDP protocol.

To enter PROTOCOL LLDP mode:

1. Verify that you are logged in to CONFIGURATION mode.

2. Enter the protocol lldp command. The prompt changes to include Dell(config-lldp).

You can return to CONFIGURATION mode by using the exit command.

Track Login Activity

Dell Networking OS enables you to track the login activity of users and view the successful and

unsuccessful login events.

When you log in using the console or VTY line, the system displays the last successful login details of the

current user and the number of unsuccessful login attempts since your last successful login to the

system. The system stores the number of unsuccessful login attempts that have occurred in the last 30

days by default. You can change the default value to any number of days from 1 to 30. By default, login

activity tracking is disabled. You can enable it using the login statistics enable command from

the configuration mode.

Restrictions for Tracking Login Activity

These restrictions apply for tracking login activity:

• Only the system and security administrators can configure login activity tracking and view the login

activity details of other users.

• Login statistics is not applicable for login sessions that do not use user names for authentication. For

example, the system does not report login activity for a telnet session that prompts only a password.