CLI Guide

Version Description
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information
The following table describes the show fip-snooping sessions command.
Field Description
ENode MAC MAC address of the ENode.
ENode Interface Slot/ port number of the interface connected to the ENode.
FCF MAC MAC address of the FCF.
FC Interface Slot/ port number of the interface to which the FCF is
connected.
VLAN VLAN ID number used by the session.
FCoE MAC MAC address of the FCoE session assigned by the FCF.
FC-ID Fibre Channel ID assigned by the FCF.
Port WWPN Worldwide port name of the CNA port.
Port WWNN Worldwide node name of the CNA port.
Example
Dell#show fip-snooping sessions
Enode MAC Enode Intf FCF MAC FCF Intf VLAN
FCoE MAC FC-ID
00:0e:1e:0c:54:a6 Te 0/14 00:05:73:f2:4f:ae Po128 100 0e:fc:
00:9a:00:27 9a:00:27 20:01:00:0e:1e:0c:54:a6
00:0e:1e:06:01:5e Te 0/16 00:05:73:f2:4f:af Po128 100 0e:fc:
00:9a:01:18 9a:01:18 20:01:00:0e:1e:06:01:5
Port WWNN
20:00:00:0e:1e:0c:54:a6
20:00:00:0e:1e:0c:54:a6
show fip-snooping statistics
Displays statistics on the FIP packets snooped on all interfaces, including VLANs, physical ports, and port
channels..
Syntax
show fip-snooping statistics [interface vlan vlan-id |
interface port-type port/slot | interface port-channel port-
channel-number]
Parameters
vlan-id Enter the VLAN ID of the FIP packet statistics to be
displayed.
port-type port/
slot
Enter the port-type and slot number of the FIP packet
statistics to be displayed.
FIP Snooping
579