CLI Guide

18
FIPS Cryptography
To configure federal information processing standards (FIPS) cryptography, use the following commands
on the switch.
fips mode enable
Enable the FIPS cryptography mode on the platform.
Syntax
fips mode enable
To disable the FIPS cryptography mode, use the no fips mode enable
command.
Default Disabled
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell (conf)#fips mode enable
WARNING: Enabling FIPS mode will close all SSH/Telnet
connection, restart those servers, and destroy all configured
host keys.
proceed (y/n) ? y
Dell (conf)#
Related
Commands
ssh — opens an SSH connection specifying the hostname, username, port number,
and version of the SSH client.
show fips status
Displays the status of the FIPS mode.
Syntax
show fips status
FIPS Cryptography
563