CLI Guide

active-zoneset
Activate the zoneset.
Syntax
active-zoneset zoneset_name
To change to the default zone behavior, use the no active-zoneset
zoneset_name command.
Parameters
zoneset_name Enter the zoneset name.
Command Modes FC FABRIC CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
9.1(1.0) Introduced on the S5000.
Example
Dell(conf)# fcoe-map default_full_fabric
Dell(conf-fcoe-default_full_fabric)# fc-fabric
Dell(conf-fmap-default_full_fabric-fcfabric)# active-zoneset
zs1
Related
Commands
show fc zoneset — displays the configured and active zoneset.
show fc ns
Display the devices in the name server database.
Syntax
show fc ns { switch } [brief]
Parameters
switch Enter the keyword switch to display all the devices in the
name server database of the switch.
brief Enter the keyword brief to display in brief devices in the
name server database.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
556
FC FLEXIO FPORT