CLI Guide

feature fc
Enable feature fc with FPort functionality.
Syntax
feature fc fport domain-id range
Parameters
Range Enter the range from 1 to 239.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Enable remote-fault-signaling rx off command in FCF FPort mode on
interfaces connected to the Compellent and MDF storage devices.
Example
Dell(conf)#feature fc fport domain-id
fc zone
Create a zone.
Syntax
fc zone zonename member
To delete a zone, use the no fc zone zonename member command.
Parameters
zonename Enter the zone name.
member Enter the WWPN, port ID, or domain/port.
Command Modes ALIAS CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
9.1(1.0) Introduced on the S5000.
Example without
member
Dell(conf)# fc zone z1
Dell(conf-fc-zone-z1)#
FC FLEXIO FPORT
551