CLI Guide

Defaults 0

Command Modes ROUTER BGP

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The default-metric command in BGP sets the value of the BGP

MULTI_EXIT_DISC (MED) attribute for redistributed routes only.

Commands

bgp always-compare-med — enables comparison of all BGP MED attributes.

redistribute — redistributes routes from other routing protocols into BGP.

description

Enter a description of the BGP routing protocol

Syntax

description {description}

To remove the description, use the no description {description}

command.

Parameters

description Enter a description to identify the BGP protocol (80

characters maximum).

Defaults none