CLI Guide

show ip bgp flap-statistics — views the BGP flap statistics.
undebug all — disables all debugging operations.
clear ip bgp peer-group
Reset a peer-group’s BGP sessions.
Syntax
clear ip bgp peer-group peer-group-name
Parameters
peer-group-name Enter the peer group name to reset the BGP sessions within
that peer group.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
debug ip bgp
Display all information on BGP, including BGP events, keepalives, notifications, and updates.
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] [in |
out]
To disable all BGP debugging, use the no debug ip bgp command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal
format.
peer-group peer-
group-name
Enter the keywords peer-group then the name of the peer
group to debug.
in (OPTIONAL) Enter the keyword in to view only information
on inbound BGP routes.
out (OPTIONAL) Enter the keyword out to view only
information on outbound BGP routes.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Border Gateway Protocol IPv4 (BGPv4)
363