CLI Guide

NOTE: If you enter the clear ip bgp ip-address
soft command, both inbound and outbound policies
are reset.
in (OPTIONAL) Enter the keyword in to activate only inbound
policies.
out (OPTIONAL) Enter the keyword out to activate only
outbound policies.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
bgp recursive-bgp-next-hop — disables next-hop resolution through other routes
learned by the BGP.
bgp soft-reconfig-backup — turns on BGP Soft Reconfiguration.
clear ip bgp dampening
Clear information on route dampening and return the suppressed route to the Active state.
Syntax
clear ip bgp dampening [ip-address mask]
Parameters
ip-address mask (OPTIONAL) Enter an IP address in dotted decimal format
and the prefix mask in slash format (/x) to clear dampening
information only that BGP neighbor.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information After you enter this command, the software deletes the history routes and returns
the suppressed routes to the Active state.
Border Gateway Protocol IPv4 (BGPv4)
361