CLI Guide

Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The MED is a 4-byte unsigned integer value and the default behavior is to assume a
missing MED as 4294967295. This command causes a missing MED to be treated
as 0. During path selection, paths with a lower MED are preferred over paths with a
higher MED.
bgp bestpath router-id ignore
Do not compare router-id information for external paths during best path selection.
Syntax
bgp bestpath router-id ignore
To return to the default selection, use the no bgp bestpath router-id
ignore command.
Defaults Disabled
Command Modes ROUTER BGP
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Configuring this option retains the current best-path. When sessions are then reset,
the oldest received path is chosen as the best-path.
bgp client-to-client reflection
Allows you to enable route reflection between clients in a cluster.
Syntax
bgp client-to-client reflection
To disable client-to-client reflection, use the no bgp client-to-client
reflection command.
Defaults Enabled when a route reflector is configured.
Command Modes ROUTER BGP
Supported Modes Full–Switch
Border Gateway Protocol IPv4 (BGPv4)
347