CLI Guide

action={act=CosQCpuNew, param0=6(0x06), param1=0(0x00)},
action={act=CopyToCpu, param0=0(0x00), param1=0(0x00)},
action={act=UpdateCounter, param0=1(0x01), param1=0(0x00)},
!--------- output truncated -----------------!
show hardware buffer interface
Display buffer statistics for a specific interface.
Syntax
show hardware buffer inteface interface{priority-group { id |
all } | queue { id| all} ] buffer-info
Parameters
interface interface
Enter any of the following keywords and slot/port or
number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
priority-group Identifier of the priority group in the range of 0 to 7.
queue Enter the keyword queue followed by id for specific queue
or keyword all.
buffer-info To display total buffer information for the interface, enter
the keywords buffer-info.
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.8(0.0) Introduced on the M I/O Aggregator and FN I/O Aggregator.
Example displaying
total-buffer
information for the
interface
Dell# show hardware buffer interface tengigabitethernet 1/1 buffer-info
----- Buffer Stats for Interface Te 1/1 -----
Maximum Shared Limit for the Interface: 38336
Default Packet Buffer allocate for the Interface: 120
Used Packet Buffer for the Interface: 0
Example displaying
priority-group
range
Dell#show hardware buffer interface tengigabitethernet 1/1 priority-
group 0 buffer-info
----- Buffer stats for unit: 0 port: 1 (interface Te 1/1) -----
------------------------------------------------------------------------
PG# PRIORITIES ALLOTED (CELLS) COUNTER (CELLS)
1588
Debugging and Diagnostics