CLI Guide

show system — displays the current status of all stack members or a specific
member.
show hardware system-flow
Display Layer 2 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware system-flow layer2 stack-unit 0–5 port-set 0–0 [counters]
Parameters
acl | qos For the selected stack member and stack member port-pipe, display which
system flow entry the packet hits and what queue the packet takes as it
dumps the raw system flow tables.
stack-unit 0–5 Enter the keywords stack-unit then 0 to 5 to select a stack member ID.
port-set 0–0
[counters]
Enter the keywords port-set with a port-pipe number—0.
(OPTIONAL) Enter the keyword counters to display hit counters for the
selected ACL or QoS option.
Defaults none
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Example
Dell#show hardware system-flow layer2 stack-unit 0 port-set 0
counters
---------------------------------------------------------------------------
EntryId Description #HITS
---------------------------------------------------------------------------
767 LLDP BPDU Redirects 2611
765 LACP traffic Redirects 250
763 ARP Reply Redirects 0
762 Slow Protocol Drops 1155
758 OSPFv3 Multicast
[33:33:00:00:00:06] 0
759 OSPFv3 Multicast
[33:33:00:00:00:05] 0
756 GRAT ARP 0
711 VLT ARP Replies for Peer 0
710 ICL Hellos 0
709 ICL MAC SYNC Frames 0
708 VLT STP BPDUs Tunneled 0
707 VLT IGMP Sync Frames 0
706 VLT ARP Replies Tunneled 0
705 VLT L2PM Sync Frames 0
Debugging and Diagnostics
1585