CLI Guide

Version Description
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The authenticator completes authentication only when port-control is set to
auto.
dot1x quiet-period
Set the number of seconds that the authenticator remains quiet after a failed authentication with a client.
Syntax
dot1x quiet-period seconds
To disable quiet time, use the no dot1x quiet-time command.
Parameters
seconds Enter the number of seconds. The range is from 1 to 65535.
The default is 60.
Defaults 60 seconds
Command Modes INTERFACE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
dot1x reauthentication
Enable periodic reauthentication of the client.
Syntax
dot1x reauthentication [interval seconds]
To disable periodic reauthentication, use the no dot1x reauthentication
command.
Parameters
interval seconds (Optional) Enter the keyword interval then the interval
time, in seconds, after which reauthentication is initiated.
The range is from 1 to 31536000 (one year). The default is
3600 (1 hour).
Defaults 3600 seconds (1 hour)
802.1X
157