CLI Guide

dot1x max-supplicants
Restrict the number of supplicants that can be authenticated and permitted to access the network
through the port. This configuration is only takes effect in Multi-Auth mode.
Syntax
dot1x max-supplicants number
Parameters
number Enter the number of supplicants that can be authenticated
on a single port in Multi-Auth mode. The range is from 1 to
128. The default is 128.
Defaults 128 hosts can be authenticated on a single authenticator port.
Command Modes INTERFACE
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
dot1x host-mode — Enables single-host or multi-host authentication.
dot1x port-control
Enable port control on an interface.
Syntax
dot1x port-control {force-authorized | auto | force-
unauthorized}
Parameters
force-authorized Enter the keywords force-authorized to forcibly
authorize a port.
auto Enter the keyword auto to authorize a port based on the
802.1X operation result.
force-
unauthorized
Enter the keywords force-unauthorized to forcibly
deauthorize a port.
Defaults none
Command Modes Auto
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
156
802.1X