CLI Guide

clear ip pim tib
Clear PIM tree information from the PIM database.
Syntax
clear ip pim tib [group]
Parameters
group (OPTIONAL) Enter the multicast group address in dotted
decimal format (A.B.C.D).
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
If you use this command on a local VLT node, all multicast routes from the local
PIM TIB, the entire multicast route table, and all the entries in the data plane are
deleted. The entries in Peer PIM TIB (Sync) are not deleted but are marked for re-
download. Both local and synced routes are removed from the multicast route
table. The peer VLT node clears synced routes from the node.
If you use this command on a peer VLT node, only the synced routes are deleted
from the multicast route table.
clear vlt statistics
Clear the statistics on VLT operations.
Syntax
clear vlt statistics [arp | domain | igmp-snoop | mac |
multicast | ndp]
Parameters
domain Clear the VLT statistics for the domain.
multicast Clear the VLT statistics for multicast.
mac Clear the VLT statistics for the MAC address.
arp Clear the VLT statistics for ARP.
igmp-snoop Clear the VLT statistics for IGMP snooping.
ndp Clear the VLT statistics for NDP.
Command Modes EXEC
Supported Modes Programmable-Mux (PMUX)
1510
Virtual Link Trunking (VLT)