CLI Guide

ManualsBrandsDell ManualsAccess PlatformsFN IO Module

1501

show interface dei-mark

Display the dei mark configuration.

Syntax

show interface dei-mark [interface slot/port]

Parameters

interface slot/port Enter the interface type then the line card slot and port

number.

Command Modes EXEC Privilege

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell#show interface dei-mark

Default CFI/DEI Marking: 0

Interface Drop precedence CFI/DEI

------------------------------------------------

Te 0/1 Green 0

Te 0/1 Yellow 1

Te 8/9 Yellow 0

Te 8/12 Yellow 0

Commands

dei mark — sets the DEI value on egress.

vlan-stack access

Specify a Layer 2 port or port channel as an access port to the stackable VLAN network.

Syntax

vlan-stack access

To remove access port designation, use the no vlan-stack access command.

Defaults Not configured.

Command Modes INTERFACE