CLI Guide

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

Usage Information

You can assign physical port or port-channel interfaces to an uplink-state group.

You can assign an interface to only one uplink-state group. Configure each

interface assigned to an uplink-state group as either an upstream or downstream

interface, but not both.

You can assign individual member ports of a port channel to the group. An uplink-

state group can contain either the member ports of a port channel or the port

channel itself, but not both.

Example

Dell(conf-uplink-state-group-16)# upstream tengigabitethernet

0/1-5

Dell(conf-uplink-state-group-16)#

Commands

• downstream — assigns a port or port-channel to the uplink-state group as a

downstream interface.

• uplink-state-group — creates an uplink-state group and enables the tracking of

upstream links.

Uplink Failure Detection (UFD)

1497