Manualshelf

CLI Guide

ManualsBrandsDell ManualsAccess PlatformsFN IO Module
1471147214731474147514761477147814791480
boot zero
Clears the primary, secondary, or default boot parameters.
Syntax
boot zero [primary | secondary | default]
Command Modes uBoot
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
default gateway
Set the default gateway IP address.
Syntax
default-gateway <ip-address>
Command Modes uBoot
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
enable
Change the access privilege level.
Syntax
enable [user | admin]
Command Modes uBoot
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
1478
u-Boot