CLI Guide

Related
Commands
clock summer-time recurring — sets the software clock to convert to daylight
saving time on a specific day each year.
show ntp associations
Display the NTP master and peers.
Syntax
show ntp associations
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information The following describes the show ntp associations command shown in the
following example.
Field Description
(none) One or more of the following symbols could be displayed:
• * means synchronized to this peer.
• # means almost synchronized to this peer.
• + means the peer was selected for possible
synchronization.
• - means the peer is a candidate for selection.
• ~ means the peer is statically configured.
remote Displays the remote IP address of the NTP peer.
ref clock Displays the IP address of the remote peer’s reference clock.
st Displays the peer’s stratum, that is, the number of hops
away from the external time source. A 16 in this column
means the NTP peer cannot reach the time source.
when Displays the last time the switch received an NTP packet.
poll Displays the polling interval (in seconds).
reach Displays the reachability to the peer (in octal bitstream).
delay Displays the time interval or delay for a packet to complete
a round-trip to the NTP time source (in milliseconds).
1464
System Time