CLI Guide

show protocol-tunnel
Display protocol tunnel information for all or a specified VLAN-Stack VLAN.
Syntax
show protocol-tunnel [vlan vlan-id]
Parameters
vlan vlan-id (OPTIONAL) Enter the keyword vlan then the VLAN ID to
display information for the one VLAN. The range is from 1 to
4094.
Defaults none
Command Modes EXEC
Supported Modes Full–Switch Mode
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show protocol-tunnel
System Rate-Limit: 75 frames/second
VLAN Protocols Interface
1000 STP,PVST Te 5/7,Te 5/6
1001 LLDP,GVRP Te 5/7,Te 5/6
1002 MMRP,MVRP Te 5/7,Te 5/6
1003 LACP,DOT1X Te 5/7,Te 5/6
1004 OAM,PAUSE Te 5/7,Te 5/6
1005 E-LMI Te 5/7,Te 5/6
Example (Specific
VLAN)
Dell#show protocol-tunnel vlan 2
System Rate-Limit: 1000 Frames/second
Interface Vlan Protocol(s)
Te1/2 2 STP, PVST
Dell#
Related
Commands
show running-config — displays the current configuration.
1384
Service Provider Bridging