CLI Guide

Related
Commands
ip dhcp snooping vlan — enables DHCP Snooping on one or more VLANs.
ip dhcp snooping database
Delay writing the binding table for a specified time.
Syntax
ip dhcp snooping database write-delay minutes
Parameters
minutes The range is from 5 to 21600.
Defaults none
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ip dhcp snooping binding
Create a static entry in the DHCP binding table.
Syntax
[no] ip dhcp snooping binding mac address vlan-id vlan-id ip
ip-address interface type slot/port lease number
Parameters
mac address Enter the keyword mac then the MAC address of the host to
which the server is leasing the IP address.
vlan-id vlan-id Enter the keywords vlan-id then the VLAN to which the
host belongs. The range is from 2 to 4094.
ip ip-address Enter the keyword ip then the IP address that the server is
leasing.
interface type
Enter the keyword interface then the type of interface to
which the host is connected.
• For a ten-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
slot/port Enter the slot and port number of the interface.
lease time Enter the keyword lease then the amount of time the IP
address is leased. The range is from 1 to 4294967295.
Defaults none
Command Modes
• EXEC
Security
1365