CLI Guide

Version Description
9.3(0.0) Supported on the M I/O Aggregator.
Usage Information The key configured with this command must match the key configured on the
TACACS+ daemon.
timeout login response
Specify how long the software waits for the login input (for example, the user name and password) before
timing out.
Syntax
timeout login response seconds
To return to the default values, use the no timeout login response
command.
Parameters
seconds
Enter a number of seconds the software waits before
logging you out. The range is:
• VTY: the range is from 1 to 30 seconds, the default is 30
seconds.
• Console: the range is from 1 to 300 seconds, the default
is 0 seconds (no timeout).
• AUX: the range is from 1 to 300 seconds, the default is 0
seconds (no timeout).
Defaults See the defaults settings shown in Parameters.
Command Modes LINE
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.3(0.0) Supported on the M I/O Aggregator.
Usage Information The software measures the period of inactivity defined in this command as the
period between consecutive keystrokes. For example, if your password is
“password” you can enter “p” and wait 29 seconds to enter the next letter.
Security
1347