CLI Guide

you want to track usage at privilege level 1 for example, use theaaa accounting
command 1 command.
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.5(0.0) Supported on the FN I/O Agregator and M I/O Aggregator.
Example
Dell(config)# aaa accounting exec default start-stop tacacs+
Dell(config)# aaa accounting command 15 default start-stop
tacacs+
Dell(config)#
Related
Commands
enable password changes the password for the enable command.
login
authentication
enables AAA login authentication on the terminal lines.
password creates a password.
tacacs-server host specifies a TACACS+ server host.
debug tacacs+
To assist with troubleshooting, view TACACS+ transactions.
Syntax
debug tacacs+
To disable debugging of TACACS+, use the no debug tacacs+ command.
Defaults Disabled.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ip tacacs source-interface
Specify an interface’s IP address as the source IP address for TACACS+ connections.
Syntax
ip tacacs source-interface interface
To delete a source interface, use the no ip tacacs source-interface
command.
1344
Security