CLI Guide

To disable authorization checking for EXEC level commands, use the no aaa
authorization exec command.
Parameters
name Define a name for the list of authorization methods.
default Define the default list of authorization methods.
local Use the authorization parameters on the system to perform
authorization.
tacacs+ Use the TACACS+ protocol to perform authorization.
none Enter the keyword none to apply no authorization.
Defaults none
Command Modes CONFIGURATION
Supported Modes All Modes
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following table lists the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6.(0.0) Supported on the FN I/O Aggregator and M I/O Aggregator.
accounting
Apply an accounting method list to terminal lines.
Syntax
accounting {exec | commands {level | role role-name} method-
list}
Parameters
exec Enter the keyword exec to apply an EXEC level accounting
method list.
commands {level |
role role-name}
Enter the keywords commands level to apply an EXEC and
CONFIGURATION level accounting method list or enter the
keywords commands role and then the role name for
accounting of commands run by a user with that role.
method-list Enter a method list that you defined using the aaa
accounting exec or aaa accounting commands.
Defaults none
Command Modes LINE
Supported Modes All Modes
1310
Security