CLI Guide

NOTE: Only one of the IP precedence values must be a successful match

criterion, not all of the specified IP precedence values must match.

Commands

class-map — identifies the class map.

match mac access-group

Configure a match criterion for a class map, based on the contents of the designated MAC ACL.

Syntax

match mac access-group {mac-acl-name}

Parameters

mac-acl-name Enter a MAC ACL name. Its contents is used as the match

criteria in the class map.

Defaults none

Command Modes CLASS-MAP

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information To access this command, enter the class-map command. After the class map is

identified, you can configure the match criteria.

Commands

class-map — identifies the class map.

match mac dot1p

Configure a match criterion for a class map based on a dot1p value.

Syntax

match mac dot1p {dot1p-list}