CLI Guide

vlan max-age — changes the time interval before PVST+ refreshes.
show spanning-tree pvst — displays the PVST+ configuration.
vlan hello-time
Set the time interval between generation of PVST+ and BPDUs.
Syntax
vlan vlan-id hello-time seconds
To return to the default value, use the no vlan hello-time command.
Parameters
vlan vlan-range Enter the keyword vlan then the VLAN numbers. The range
is from 1 to 4094.
hello-time
seconds
Enter the keywords hello-time then the time interval, in
seconds, between transmission of BPDUs. The range is from
1 to 10 seconds. The default is 2 seconds.
Defaults 2 seconds
Command Modes CONFIGURATION (conf-pvst)
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
vlan bridge-priority — sets the bridge-priority value.
vlan forward-delay — changes the time interval before the system transitions to the
forwarding state.
vlan max-age — changes the time interval before PVST+ refreshes.
show spanning-tree pvst — displays the PVST+ configuration.
vlan max-age
To maintain configuration information before refreshing that information, set the time interval for the
PVST+ bridge.
Syntax
vlan vlan-range max-age seconds
1216
Per-VLAN Spanning Tree Plus (PVST+)