CLI Guide

monitor session

Create a session for monitoring traffic with port monitoring.

Syntax

monitor session session-ID

To delete a session, use the no monitor session session-ID command.

To delete all monitor sessions, use the no monitor session all command.

Parameters

session-ID Enter a session identification number. The range is from 0 to

65535.

Defaults none

Command Modes CONFIGURATION

Supported Modes All Modes

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.4(0.0) Supported on the FN I/O Aggregator.

8.3.17.0 Supported on the M I/O Aggregator.

Usage Information The monitor command is saved in the running configuration at Monitor Session

mode level and can be restored after a chassis reload.

Example

Dell(conf)# monitor session 60

Dell(conf-mon-sess-60)

Related Command

show config

Display the current monitor session configuration.