CLI Guide

description
Enter a description of this monitoring session.
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description Enter a description regarding this session (80 characters
maximum).
Defaults none
Command Modes MONITOR SESSION (conf-mon-sess-session-ID)
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related
Commands
monitor session — enables a monitoring session.
flow-based enable
Enable flow-based monitoring.
Syntax
flow-based enable
To disable flow-based monitoring, use the no flow-based enable command.
Defaults Disabled, that is flow-based monitoring is not applied.
Command Modes MONITOR SESSION (conf-mon-sess-session-ID)
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Added support for the RPM/ERPM.
9.3(0.0) Introduced on the MXL 10/40GbE Switch IO Module
platform.
8.1.1.0 Introduced on the E-Series ExaScale.
1188
Port Monitoring