CLI Guide

Example (Mapping)
Dellshow ipv6 pim rp mapping
PIM Group-to-RP Mappings
Group(s): ff00::/8
RP: 14::1, v2
Info source: 14::1, via bootstrap, priority 192
Uptime: 00:03:37, expires: 00:01:53
Group(s): ff00::/8, Static
RP: 14::2, v2
Dell
show ipv6 pim tib
View the IPv6 PIM multicast-routing database (tree information base — tib).
Syntax
show ipv6 pim tib [group-address [source-address]]
Parameters
group-address (OPTIONAL) Enter the multicast group address in the
x:x:x:x::x format to view RP mappings for a specific group.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
source-address (OPTIONAL) Enter the source address in the x:x:x:x::x
format.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full—Swtich
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show ipv6 pim tib
PIM Multicast Routing Table
Flags: D - Dense, S - Sparse, C - Connected, L - Local, P -
Pruned,
R - RP-bit set, F - Register flag, T - SPT-bit set, J -
Join SPT,
M - MSDP created entry, A - Candidate for MSDP
Advertisement
K - Ack-Pending State
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
PIM-Sparse Mode (PIM-SM)
1185