CLI Guide

PIM-Sparse Mode (PIM-SM)

The protocol-independent multicast (PIM) commands are supported by the Dell Networking Operating

System (OS).

This chapter contains the following sections:

• IPv4 PIM-Sparse Mode Commands

• IPv6 PIM-Sparse Mode Commands

IPv4 PIM-Sparse Mode Commands

The following describes the IPv4 PIM-sparse mode (PIM-SM) commands.

clear ip pim rp-mapping

The bootstrap router (BSR) feature uses this command to remove all or particular rendezvous point (RP)

advertisement.

Syntax

clear ip pim rp-mapping rp-address

Parameters

rp-address (OPTIONAL) Enter the RP address in dotted decimal format

(A.B.C.D).

Command Modes EXEC Privilege

Supported Modes Full—Swtich

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.

1152

PIM-Sparse Mode (PIM-SM)