CLI Guide

show cam pbr
Display the PBR CAM content.
Syntax
show cam pbr {[interface interface] | stack—unit slot-number port-set number]} [summary]
Parameters
interface interface Enter the keyword interface then the name of the interface.
stack–unit
number
Enter the keyword stack-unit then the slot number. The range is from 0 to 11 .
port-set number Enter the keywords port-set then the port-pipe number. The range is from 0 to 0.
summary Enter the keyword summary to view only the total number of CAM entries.
Defaults none
Command Modes EXEC
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Added support for removing the Sonet interface on the MXL 10/40GbE Switch IO Module.
7.4.1.0 Introduced.
Usage Information The show cam pbr command displays the PBR CAM content.
Example
Dell#show cam pbr stack-unit 0 po 0
TCP Flag: Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST, Bit 1 - SYN, Bit 0 - FIN
Cam Port VlanID Proto Tcp Src Dst SrcIp DstIp Next-hop Egress
Index Flag Port Port MAC Port
------------------------------------------------------------------------------------------------------------------------------------------
00000 5 N/A IP 0x0 0 0 22.22.2.22/32 33.33.3.0/24 00:01:e8:8a:fd:76 0/0
00001 5 N/A 145 0x0 0 0 0.0.0.0/0 44.4.4.4/32 00:01:e8:8a:fd:76 Vl 100(0/1)
00002 5 N/A TCP 0x0 0 0 55.1.3.0/24 66.6.6.6/32 00:01:e8:8a:fd:76 Po 128
00003 5 N/A UDP 0x0 0 0 55.1.3.0/24 66.6.6.6/32 00:01:e8:8a:fd:76 Po 128
00004 5 N/A IP 0x0 0 0 0.0.0.0/0 0.0.0.0/0 00:01:e8:8a:fd:76 Vl 1020(Po
100)
Dell#
Related
Commands
• ip redirect-group – applies a redirect group to an interface.
• show ip redirect-list – displays the redirect-list configuration.
• show cam-usage – displays the CAM usage on ACL, router, or switch.
1150
Policy-based Routing (PBR)