CLI Guide

static
Enter the keyword static to redistribute manually
configured routes.
metric metric-
value
Enter the keyword metric then the metric value.
The range is from 0 to 16777214.
The default is 20.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then the
OSPFv3 link state type of 1 or 2 for default routes. The
values are:
• 1 for a type 1 external route
• 2 for a type 2 external route
The default is 2.
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name
of an established route map. If the route map is not
configured, the default is deny (to drop all routes).
tag tag-value
(OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPFv3.
The range is from 0 to 4294967295
The default is 0.
Defaults Not configured.
Command Modes
ROUTER OSPF for OSPFv2
ROUTER OSPFv3 for OSPFv3
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Added support for OSPFv3.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
To redistribute the default route (x:x:x:x::x), use the default-information
originate command.
Open Shortest Path First (OSPFv2 and OSPFv3)
1135