CLI Guide

• 2 = Type 2 external route

route-map map-

name

(OPTIONAL) Enter the keywords route-map then the name

of an established route map.

Defaults Disabled.

Command Modes ROUTER OSPF

Supported Modes Full—Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Commands

redistribute — redistributes routes from other routing protocols into OSPF.

default-metric

Change the metrics of redistributed routes to a value useful to OSPF. Use this command with the

redistribute command.

Syntax

default-metric number

To return to the default values, use the no default-metric [number]

command.

Parameters

number Enter a number as the metric. The range is from 1 to

16777214.