CLI Guide

Parameters
username Enter a text string as the user name up to 40 characters
long.
Defaults No user name is configured.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information Configure a password with the ip ftp password command.
Related
Commands
ip ftp password — sets the password for FTP connections.
line
Enable and configure console and virtual terminal lines to the system. This command accesses LINE
mode, where you can set the access conditions for the designated line.
Syntax
line {console 0 | vty number [end-number]}
Parameters
console 0 Enter the keyword console 0 to configure the console
port.
The console option is <0-0>.
vty number Enter the keyword vty followed by a number from 0 to 9 to
configure a virtual terminal line for Telnet sessions.
The system supports 10 Telnet sessions.
end-number
(OPTIONAL) Enter a number from 1 to 9 as the last virtual
terminal line to configure.
You can configure multiple lines at one time.
Defaults Not configured
Command Modes CONFIGURATION
Supported Modes All Modes
106
Control and Monitoring