Administrator Guide

The following example removes the secadmin access to LINE mode and then veries that the security administrator can no longer
access LINE mode, using the show role mode configure line command in EXEC Privilege mode.
Dell(conf)#role configure deleterole secadmin ?
LINE Initial keywords of the command to modify
Dell(conf)#role configure deleterole secadmin line
Dell(conf)#do show role mode ?
configure Global configuration mode
exec Exec Mode
interface Interface configuration mode
line Line Configuration mode
route-map Route map configuration mode
router Router configuration mode
Dell(conf)#do show role mode configure line
Role access:sysadmin
Example: Grant and Remove Security Administrator Access to Congure Protocols
By default, the system dened role, secadmin, is not allowed to congure protocols. The following example rst grants the secadmin
role to congure protocols and then removes access to congure protocols.
Dell(conf)#role configure addrole secadmin protocol
Dell(conf)#role configure deleterole secadmin protocol
Example: Resets Only the Security Administrator role to its original setting.
The following example resets only the secadmin role to its original setting.
Dell(conf)#no role configure addrole secadmin protocol
Example: Reset System-Dened Roles and Roles that Inherit Permissions
In the following example the command protocol permissions are reset to their original setting or one or more of the system-dened roles
and any roles that inherited permissions from them.
Dell(conf)#role configure reset protocol
Adding and Deleting Users from a Role
To create a user name that is authenticated based on a user role, use the username name password encryption-type password role
role-name command in CONFIGURATION mode.
Example
The following example creates a user name that is authenticated based on a user role.
Dell (conf) #username john password 0 password role secadmin
The following example deletes a user role.
NOTE
: If you already have a user ID that exists with a privilege level, you can add the user role to username that has a privilege
Dell (conf) #no username john
The following example adds a user, to the secadmin user role.
Dell (conf)#username john role secadmin password 0 password
Security
717