Administrator Guide
Verifying the Congurations
When the port channel of the upstream switch is congured, the port channel on the FN IOM is up. A series of messages is logged on the
system indicating port channel 128 and the ports connected to the servers downstream are up.
Changed interface state to up: Po 128
Downstream interface cleared from UFD error-disabled: Te 0/1
Downstream interface cleared from UFD error-disabled: Te 0/2
Downstream interface cleared from UFD error-disabled: Te 0/3
…etc.
To verify the status, run the following commands:
Dell#show interfaces port-channel 128
Port-channel 128 is up, line protocol is up
Dell#show uplink-state-group
Uplink State Group: 1 Status: Enabled, Up
64 Getting Started