Administrator Guide

tagged interface or untagged interface
You can enter the interfaces singly or in range format, either comma-delimited (slot/port,port,port) or hyphenated (slot/
port-port
).
You can only add ports dened as host to the VLAN.
Example of Conguring Private VLAN Members
The following example shows the use of the PVLAN commands that are used in VLAN INTERFACE mode to congure the PVLAN member
VLANs (primary, community, and isolated VLANs).
Dell#conf
Dell(conf)# interface vlan 10
Dell(conf-vlan-10)# private-vlan mode primary
Dell(conf-vlan-10)# private-vlan mapping secondary-vlan 100-101
Dell(conf-vlan-10)# untagged TenGig 2/1
Dell(conf-vlan-10)# tagged TenGig 2/3
Dell(conf)# interface vlan 101
Dell(conf-vlan-101)# private-vlan mode community
Dell(conf-vlan-101)# untagged TenGig 2/10
Dell(conf)# interface vlan 100
Dell(conf-vlan-100)# private-vlan mode isolated
Dell(conf-vlan-100)# untagged Te 2/2
620 Private VLANs (PVLAN)