Administrator Guide
In the following example, virtual local area network (VLAN) 400 is congured with an access list to permit only IGMP reports for group
239.0.0.1. Though Receiver 2 sends a membership report for groups 239.0.0.1 and 239.0.0.2, a multicast routing table entry is created only
for group 239.0.0.1. VLAN 300 has no access list limiting Receiver 1, so both IGMP reports are accepted, and two corresponding entries are
created in the routing table.
Figure 86. Preventing a Host from Joining a Group
Table 47. Preventing a Host from Joining a Group — Description
Location Description
1/21
• Interface GigabitEthernet 1/21
• ip pim sparse-mode
• ip address 10.11.12.1/24
• no shutdown
1/31
• Interface GigabitEthernet 1/31
532 Multicast Features